MIHM-VOGT TABEO Series, Оригинальное руководство по эксплуатации

Страница: 45 / 46

Decommissioning
10/2018 Version 4.0en Operating Manual Tabeo Sintering Oven Metal Page 45
Decommissioning
Decommissioning can be carried out for two reasons:
y
For the purpose of reinstalling the unit at another location.
y
For the purpose of final disposal.
If the sintering oven is to be reinstalled at another location, decommissioning
must be well prepared. All components and fittings must be carefully removed,
labelled and, if necessary, packaged for transport. This ensures that all parts
can be identified correctly and refitted in the correct positions when reassem
-
bling the unit.
1. Switch the sintering oven off.
2. Disconnect the sintering oven from the voltage supply
(pull out mains plug).
3. Remove all connections (e.g. PC interface cable, etc.) from the sinter-
ing oven.
Disposal
Safety
Warning
Release of pollutants!
Pollutants can be inhaled when the insulating materials are handled.
h
Wear personal protective equipment (respiratory protection) during
disposal.
Warning
Potential contamination of the environment and groundwater due to
improper disposal!
h
The regulations and guidelines of the legislature in the country of op -
eration must be complied with when disposing of parts of the unit and
operating materials.
Disposal
1. Sort the component parts of the sintering oven into recyclable materi -
als, hazardous substances and operating materials.
2. Dispose of the component parts of the sintering oven or take them to
be recycled.