Page 26
Operating Manual Tabeo Sintering Oven Metal
Version 4.0en
10/2018
Initial commissioning
Entering the heating parameters for phase 1:
1.
Select the heating speed using the
and
buttons.
The minimum heating speed is 1°C/min (2°F/min),
the maximum heating speed is 40°C/min (104°F/min).
2.
Select the temperature by pressing the
Right-hand arrow
button.
3.
Select the temperature using the
and
buttons.
Notice
The maximum temperature is 1400 °C (2552 °F).
4.
Select the holding time by pressing the
Right-hand arrow
button.
5.
Select the holding time using the
and
buttons.
Notice
The maximum holding time is 999 minutes.
If a longer holding time is required, another phase must be added.
6.
Navigate to the level selection using the
Right-hand arrow
button. The levels are selected using the
and
buttons.
7.
Carry out steps 1 to 5 for additional phases.
Saving the heating program
After programming the specific heating parameters for a phase, you can exit
programming mode.
1.
To exit programming mode, press and hold the
Program
button
until the LED under the function display lights up permanently.
Â
The program has been permanently saved.
Содержание TABEO Series
Страница 46: ......
