Technical description
10/2018
Version 4.0en
Operating Manual Tabeo Sintering Oven Metal
Page 11
Technical description
Function
The
Tabeo
sintering oven
is used to fire sinterable ceramics.
The product to be sintered is placed in the sintering dish and set on the
support pins in the combustion chamber. The heat-up process starts after
entering the heating parameters and pressing the Start button.
Once the heating program has ended and the
sintering oven
has cooled
down, the finished product can be removed from the oven.
Heating chamber
The product is sintered in the heating chamber. This consists of two differ
-
ent ceramic insulation layers and is operated using four heating elements
connected in series. The outer insulating layer is designed for temperatures
up to 1200 °C; the inner layer for temperatures up to 1650 °C.
Oven door
The oven door consists of a two-part ceramic door panel. A safety switch
disconnects the heating current as soon as the oven door is opened.
The oven door has an electronic lock and can be opened only if the tem
-
perature is below 300 °C.
Oven housing
The oven housing consists of steel plate coated with plastic on both the
inside and the outside
and is cooled by a permanent ventilation system.
Program controller
The program controller has a finishing-time setting that can be used to spec
-
ify a day and time for the program to finish. The switch-on time is calculated
automatically so that the heating process is stopped at the required time
and the sintered item can be removed.
Operating parameters and heating programs are stored in a non-volatile
memory and are retained even if the power supply fails
.
The set target temperature is maintained within an accuracy of
± 1 °C.
A temperature sensor integrated into the heating chamber measures the
temperature of the chamber close to the product.
A thermocouple fail-safe prevents the sintering oven from overheating if the
temperature sensor becomes defective.
Содержание TABEO Series
Страница 46: ......
