manualshive.com logo in svg

MIHM-VOGT TABEO Series, Оригинальное руководство по эксплуатации

Поделиться
Скачать
MIHM-VOGT TABEO Series Скачать руководство пользователя страница 42

Page 42

Operating Manual Tabeo Sintering Oven Metal

Version 4.0en

10/2018

Faults and error messages

Faults and error messages

Safety

 

$

Danger

Electricity!

Risk of death from electric shock.

 

h

Work on electrical systems may be performed by qualified electricians 

only.

 

h

Before carrying out any installation, maintenance, cleaning or repair 

work, disconnect the power supply of the sintering oven (pull out 
mains plug) and secure it against being switched back on.

 

h

Do not touch live cables and components with wet hands.

 

h

Observe the accident-prevention regulations when working with elec-

tric current.

 

$

Warning

Hot surfaces!

Risk of serious burns to the limbs.

 

h

Do not touch the housing or the oven door during operation.

 

h

Ensure that the sintering oven has cooled down completely before 

carrying out maintenance, cleaning and repair work.

 

h

Wear heat-resistant, thermally insulated safety gloves when it is nec-

essary to carry out work on hot components.

Notice

Material damage due to incorrect repair of electric cables!

This may cause malfunctions and make electric components defective.

 

h

Do not repair defective cables or plugs.

Содержание TABEO Series















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды