Migatronic RWF 30, Руководство пользователя

Страница: 7 / 42

7
Connection and operation
Warning
Read warning notice and instruction
manual carefully prior to initial
operation and save the information
for later use.
Connection
1. Compressed air connection
AIR Clean - Inlet
2. Compressed air connection
AIR Clean - Outlet
3. CAN-plug
4. Gas connection
5. Power +
6. Connection of cooling hose (not all models)
- flow (blue)
- return (red)
7. Status indicator
8. Wire inlet
9. Torch connection
10. Collision protection signal to robot controller
11. Torch collision protection and
touch sense connection
Important!
In order to avoid destruction of
plugs and cables, good electric
contact is required when connecting
earth cables and intermediary cables
to the machine.
Recommended cable dimensions
Welding current DC PULSE
200 A 35 mm² 35 mm²
300 A 50 mm² 70 mm²
400 A 95 mm² / 2x50 mm² 95 mm² / 2x50 mm²
550 A 2x70 mm² 2x70 mm²
Welding process Distance to
work piece
(a+b)
Total cable length
in welding circuit
(a+b+c)
MIG - IAC and pulse 10 m 20 m
MIG - non pulse 30 m 60 m
2 1
3
4
8
9
10 11 7 6 6
5
c
a
b
WARNING
When you activate the torch trigger,
there is voltage applied to the
welding wire.