Miele T 8826 WP, Руководство по эксплуатации

Страница: 37 / 64

Other problems
Problem Possible cause Remedy *
The drying
process goes
on too long or
even switches
off. Ventilation to and from the
dryer may be insufficient,
e.g. because it is installed
in a room which is too
small. This can cause the
temperature in the room to
rise sharply. – Open a door or window while
the dryer is in operation for
increased air flow.
– Detergent residues, hair
and fine fluff can clog the
fluff filters and the fine
filters.
– The cooling ribs can be
clogged.
– Clean the fluff filters and fine
filters.
– Remove any visible fluff:
. . . From the heat exchanger
unit, bottom left (see "Cleaning
and care").
. . . From the cooling fins
behind the grille, bottom right
(see this section).
The cool air intake panel is
blocked. – Move any objects, such as a
laundry basket, away from the
panel.
The fluff filters and fine
filters were wet when
replaced. – The fluff filters and fine filters
must be dry.
The laundry has not been
spun sufficiently. – Make sure that your laundry is
thoroughly spun at the
appropriate spin speed in the
washing machine.
The tumble dryer has been
overloaded. – Do not exceed the maximum
load for the programme
selected.
Metallic components, e.g.
zips have prevented the
dryer from registering the
correct moisture level in the
laundry. – Open zips next time.
– If the problem occurs again,
dry garments with long zips
using the
Warm air programme
(timed drying).
* Switch the dryer off and then on again before starting the programme.
Problem solving guide
37