F
Start the programme
The
Start/Stop
button will flash when a
programme is being selected. The
flashing indicates that a programme
can be started.
^
Press the
Start/Stop
button.
The
Start/Stop
button will now light up
constantly.
The
Perfect Dry
indicator will flash or
light up constantly with the sensor
controlled drying programmes. It will
not come on at all with timed drying
programmes (see "Operating the
tumble dryer").
Please note: The programme duration
shown in the display is an estimate and
can vary.
Before the end of a programme
There is a cooling down phase at the
end of the drying sequence (
Cooling
down
will light up). The programme is
not finished until the cooling down
phase has been completed.
G
Remove the laundry at the end of
the programme
0
and
Finish
will appear in the display
to indicate that the programme has
finished. The buzzer (if selected) will
sound at intervals.
The drum will continue to rotate at
intervals for up to two hours to prevent
laundry creasing, if you do not wish to
remove it immediately (anti-crease).
There is no anti-crease phase at the
end of the
Woollens
programme.
^
Press the
Door
button.
^
Open the door.
^
Remove the laundry.
Check that all items have been
removed from the drum. If items are
left in the dryer, they could be
damaged by overdrying when the
dryer is next used.
If the dryer is switched on at the mains
and the door is opened, the drum
lighting will come on. It will go out a few
minutes later to save energy.
^
Press the
jk
button to switch the
dryer off.
^
Clean the fluff filters.
^
Close the door.
^
Empty the condensed water
container (unless the dryer has been
connected for external drainage).
How to dry correctly
19
Содержание T 8826 WP
Страница 63: ...63 ...
Страница 64: ...M Nr 09 263 310 01 Alteration rights reserved 1212 ...