Miele PWT 6089 Vario, Инструкции по эксплуатации и монтажу, Страница: 9 / 96

Correct use
~
Do not install the appliance stack in a
room where there is a risk of frost
occurring. Frozen hoses may burst or split.
The reliability of the control unit may be
impaired at temperatures below freezing
point.
~
Always keep the area around the
appliance stack free of dust and lint. Dust
drawn into the appliances can cause
blockages over time. Faults can then
occur as well as the risk of fire.
~
Before using the washer-extractor and
tumble dryer stack for the first time, check
that the transit bars at the rear of the
washer-extractor have been removed (see
section on "Installation and connection").
During spinning, a transit bar which is still
in place may result in damage to both the
appliance stack and adjacent furniture or
appliances.
~
Turn off the water supply if the
appliance is to be left for any length of
time (e.g. vacation), especially if there
is no floor drain (gully) in the immediate
vicinity.
~
Flooding danger.
If hooking the drain hose into a wash
basin, check that the water can drain
off quickly enough to prevent the sink
from overflowing. Make sure the drain
hose is secure, so that the force of the
water flowing out of the hose does not
dislodge it.
~
Take care to ensure that foreign
objects (e.g. nails, pins, coins, paper
clips) do not find their way into the
washer-extractor with the laundry. It is
particularly important to ensure that
items are free of any metal filings which
may be hidden in them. These may
damage components of the
washer-extractor (e.g. suds container,
drum), which in turn can result in
damage to the laundry.
~
If the correct amount of detergent is
dispensed, the washer-extractor should
not need to be descaled. If, however,
you do wish to descale it, only use
proprietary non-corrosive descaling
agents and strictly observe the
instructions on the packaging. A
special descaling agent is available to
order from Miele. Follow the instructions
for use on the packaging carefully.
~
Textiles which have been
pre-treated in solvent based cleaning
agents must be thoroughly rinsed in
clean water before being washed in the
washer-extractor.
~
Never use solvent based cleaning
agents (e.g. those containing benzine)
in the washer-extractor, as this may
result in damage to component parts
and create toxic fumes. Such agents
also pose a fire and explosion hazard.
~
Benzine, petrol, paraffin or any
easily flammable liquid must not be
stored or used near the appliance
stack. Fire and explosion risk.
IMPORTANT SAFETY INSTRUCTIONS
9