Miele PWT 6089 Vario Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 96

Miele PWT 6089 Vario Скачать руководство пользователя страница 7

Technical safety

~

Before setting up the appliance

stack, check it for any externally visible
damage.
Do not install or use a damaged
appliance.

~

The electrical safety of this

appliance stack can only be
guaranteed when it is correctly earthed.
It is most important that this basic
safety requirement is observed and
regularly tested, and where there is any
doubt the on-site wiring system should
be inspected by a qualified electrician.
The manufacturer cannot be held liable
for the consequences of an inadequate
earthing system (e.g. electric shock).

~

Unauthorized repairs could result in

unforeseen dangers for the user, for
which the manufacturer cannot accept
liability. Repairs should only be
undertaken by a Miele service
technician. If this is not done, any
resultant damage will not be covered
by the guarantee.

~

Do not make any alterations to the

appliance stack, unless authorized to
do so by Miele.

~

To ensure the correct performance

of the appliances and to prevent the
risk of faults and fire, it is important to
check it and carry out maintenance on
a regular basis.

~

This washer-extractor and tumble

dryer stack must only be connected to
the on-site water supply using a hose
that is in good condition. Old hoses
must not be re-used. Check the hose
regularly for signs of wear. Change in
good time to avoid the risk of leaks and
subsequent damage.

~

In the event of a fault or for cleaning

purposes, the appliance is only
completely isolated from the electricity
supply when:

– the connection plugs on the

washer-extractor and on the tumble
dryer have been withdrawn, or

– the on-site fuse has been disabled for

both the washer-extractor and tumble
dryer, or

– the screw-out fuse has been disabled

for both the washer-extractor and the
tumble dryer (in countries where this
is applicable).

~

Faulty components must only be

replaced by genuine Miele original
spare parts. Only when these parts are
fitted can the safety standards of the
appliance be guaranteed.

~

Do not use force to open the

washer-extractor drum door. The door
handle is fitted with a safety device to
ensure that the door lock functions
correctly.

IMPORTANT SAFETY INSTRUCTIONS

7

«
...
5
6
7
8
9
...
»

Содержание PWT 6089 Vario

































































































Отзывы:

Нет отзывов