Miele PWT 6089 Vario Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 96

Miele PWT 6089 Vario Скачать руководство пользователя страница 10

~

Only use dyes specified by the

manufacturer as being suitable for use
in a washing machine. Always observe
the manufacturer's instructions
carefully.

~

Dye removers contain sulphur

compounds which can cause damage
such as corrosion. Do not use these
products in the washer-extractor.

~

Avoid contact of stainless steel

surfaces (front, lid, casing) with liquid
cleaning and disinfecting agents which
contain chlorine or sodium
hypochlorite. These agents can have a
corrosive effect on stainless steel.
Chlorine beach is aggressive and
corrosive, do not store open containers
of these agents near the appliance.

~

Do not use a pressure washer or

hose to clean the appliance stack.

~

It is particularly important to observe

manufacturer's instructions when using
a combination of cleaning agents and
special application products. Only use
the product for the application
described by the manufacturer to avoid
any material damage or the occurrence
of strong chemical reactions.

~

The tumble dryer must only be used

when it is connected to a suitable
ducting system. The installation site
must be adequately ventilated.

~

The ducting must not be connected

to

– a chimney or vent flue which is in

use,

– or to ducting which ventilates rooms

with fireplaces,

– or to chimneys being used by other

appliances.

Smoke or exhaust fumes can cause
poisoning.

~

The lint filter must be cleaned

regularly.

~

The dryer must not be used without

the lint filter in place or if the lint filter is
damaged in any way. Damaged filters
can cause operational faults and
blockages in the airways, the heating
elements and in the ducting. Fire
hazard!
In the event of a damaged filter, switch
the dryer off and replace the filter with a
new one.

~

Check all parts of the extraction

system on a regular basis (e.g. wall
vent, external grille, bends in the
ducting etc.) and make sure they are all
free of any hindrance. A build-up of lint
will prevent a free flow of air through the
system. If the dryer is to be connected
to an existing ducting system, this must
be checked for suitability beforehand.

IMPORTANT SAFETY INSTRUCTIONS

10

«
...
8
9
10
11
12
...
»

Содержание PWT 6089 Vario

































































































Отзывы:

Нет отзывов