Miele K 35422 iD страница 12 Скачать руководство пользователя | Manualshive

Страница: 12 / 88

background image

Caring for the environment

12

Disposal of the packing
material

The transport and protective packing
has been selected from materials which
are environmentally friendly for
disposal, and can normally be recycled.

Recycling the packaging reduces the
use of raw materials in the
manufacturing process and also
reduces the amount of waste in landfill
sites. Ensure that any plastic
wrappings, bags etc. are disposed of
safely and kept out of the reach of
babies and young children. Danger of
suffocation!

Disposing of your old
appliance

Electrical and electronic appliances
often contain valuable materials. They
also contain specific materials,
compounds and components, which
were essential for their correct function
and safety. These could be hazardous
to human health and to the environment
if disposed of with your domestic waste
or if handled incorrectly. Please do not,
therefore, dispose of your old appliance
with your household waste.

Please dispose of it at your local
community waste collection / recycling
centre for electrical and electronic
appliances, or contact Miele. You are
also responsible for deleting any
personal data that may be stored on the
appliance being disposed of.

Take care not to damage the pipework
at the back of the appliance before or
during transportation to an authorised
collection depot.
In this way, refrigerant in the pipework
and oil in the compressor will be
contained, and will not leak out into the
environment.

Please ensure that your old appliance
presents no danger to children while
being stored awaiting disposal. See
“Warning and Safety instructions” for
more information.

«
...
10
11
12
13
14
...
»

Содержание K 35422 iD

























































































Отзывы:

Нет отзывов

Похожие инструкции для K 35422 iD

Бренд: GE Страницы: 95

Бренд: Caldura Страницы: 8

Бренд: Jacky's Страницы: 40

Бренд: Oceanic Страницы: 118

Бренд: Samsung Страницы: 2

Бренд: Fridgemaster Страницы: 20

Бренд: Heinner Страницы: 36

Бренд: Jenn-Air Страницы: 23

Бренд: White-Westinghouse Страницы: 32

Бренд: Thermo Scientific Страницы: 41

Бренд: Blomberg Страницы: 165

Party Cooler none

Бренд: Equator Страницы: 4

Бренд: Vestfrost Страницы: 52

Бренд: Stirling Страницы: 24

FRN-Q19D Series

Бренд: DAEWOO ELECTRONICS Страницы: 22

Бренд: Heinner Страницы: 105

MASTERCHEF EXECUTIVE PSC-WG-1020

Бренд: Sam Cook Страницы: 32

Бренд: Electrolux Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды