Miele K 35422 iD страница 28 Скачать руководство пользователя

Страница: 28 / 88

Further settings



By touching either the





sensor

you can now set whether the safety
lock is switched on or off:

: safety lock is switched off

: safety lock is switched on



Touch the OK sensor to confirm your
selection.

The selected setting is saved and the



symbol flashes.



Touch the settings sensor to leave
settings mode.
Otherwise, the electronics will leave
settings mode automatically after
approx. one minute.

When the safety lock is switched on,



lights up in the display.

Audible tones



The appliance features acoustic signals
such as a keypad tone and warning
tone for the door alarm.

The keypad tone and door alarm
warning tone can be switched on or off,
but the temperature alarm cannot be
switched off.

You can choose from four settings
options. Option

is set at the factory,

i.e. both the keypad tone and the door
alarm are switched on.

Switching audible tones on/off



Touch the settings sensor.

All selectable symbols appear in the
display and the



flashes.



Touch the sensors for setting the
temperature (





) repeatedly until

the



symbol appears in the

display.



Touch the OK sensor to confirm your
selection.

The last selected setting flashes in the
display and the



symbol lights up.

Содержание K 35422 iD

























































































Результаты поиска

Содержание K 35422 iD

Отзывы:

Похожие инструкции для K 35422 iD

Бренды по названию

Популярные бренды

Miele K 35422 iD, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание K 35422 iD

Отзывы:

Похожие инструкции для K 35422 iD

Бренды по названию

Популярные бренды