manualshive.com logo in svg

Miele K 35422 iD, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele K 35422 iD Скачать руководство пользователя страница 22

The correct temperature

22

It is very important to set the correct
temperature for storing food in the
appliance. Micro-organisms will cause
food which is not stored at the correct
temperature to deteriorate rapidly.
Temperature influences the growth rate
of these micro-organisms. Reducing the
temperature reduces their growth rate.

The temperature in the appliance will
rise:

– the more often the door is opened

and the longer it is kept open,

– the more food is stored in the

refrigerator,

– the warmer the food is which is being

put into it,

– the higher the ambient temperature

surrounding the appliance. The
appliance is designed for use within
specific ambient temperatures
(climate range). Do not use in
ambient temperatures for which it is
not designed.

. . . in the refrigerator section

We recommend a temperature of 

4 °C

in the refrigerator section.

Содержание K 35422 iD

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды