Miele K 35422 iD страница 44 Скачать руководство пользователя | Manualshive

Страница: 44 / 88

background image

Cleaning and care

44



Clean the condensate channel and
drain hole frequently so that
condensate can drain away
unhindered. Use a straw or similar to
clear the drain if necessary.



Leave the door open to air the
appliance for a short while and to
prevent odours building up.

Cleaning the door seals



If a door seal is damaged or if it

has come out of the groove, the door
will not close properly and cooling
performance will be reduced.
Condensate will build up in the
interior and this can cause a build-up
of ice.
Do not damage the door seals and
ensure that they do not come out of
their groove.

Do not use any oils or grease on the
door seals as these will cause the
seals to deteriorate and become
porous over time.



The door seals should be cleaned
regularly with clean water, and then
wiped dry with a soft cloth.

Cleaning the air vents

A build-up of dust will increase the
energy consumption of the appliance.



The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (you could
use a Miele vacuum cleaner dusting
brush, for example). A build-up of
dust will increase the energy
consumption of the appliance.

Starting up the appliance after
cleaning



Refit all shelves and accessories in
the appliance.



Reconnect to the mains and switch
the appliance back on.



Switch on the SuperCool function for
a while so that the refrigerator section
can cool down quickly.



Place food back in the refrigerator
section and close the door.

Replacing the charcoal filters

Charcoal filters and a KKF-FF (Active
AirClean) holder are available as
optional accessories (see “Guide to
the appliance - Optional accessories”).

Replace the charcoal filters in the
holder every 6 months.

Replacement KKF-RF charcoal filters
are available from Miele or via the
internet at shop.miele.com.

Useful tip:

The holder for the charcoal

filters is dishwasher-safe.



Pull the charcoal filter holder upwards
to remove it from the shelf.

When in position the charcoal filters
must not touch the back wall of the
appliance as the moisture could
cause them to stick to the back wall.
Insert the new charcoal filters into
the holder so that they do not
protrude over the edge of the holder.

«
...
42
43
44
45
46
...
»

Содержание K 35422 iD

























































































Отзывы:

Нет отзывов

Похожие инструкции для K 35422 iD

Бренд: GE Страницы: 92

Cafe CYE23TSDSS

Бренд: GE Страницы: 2

Бренд: Dacor Страницы: 196

Vitrifrigo BD50F

Бренд: Danfoss Страницы: 120

Бренд: JUNO Страницы: 11

Бренд: Williams Страницы: 31

Бренд: Blaupunkt Страницы: 4

Бренд: Cylinda Страницы: 152

Бренд: TCL Страницы: 19

Бренд: Avanti Страницы: 40

coolmatic hdc-190

Бренд: Waeco Страницы: 140

Бренд: Arctica Страницы: 9

Бренд: YATO Страницы: 92

Бренд: Aegis Страницы: 12

Бренд: Progress Страницы: 40

Бренд: Orbegozo Страницы: 30

Бренд: Zanussi Страницы: 73

Бренд: Beko Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды