Miele K 35422 iD, Инструкции по эксплуатации и монтажу

Страница: 77 / 88

Installing the appliance
77
On furniture with door fittings (e.g.
stubs, seals etc.):
The dimension of these must be taken
into account when making sure there
is a gap all round of
42 mm .

Pull the appliance forwards by the
appropriate dimension.
 Check again, to make sure there is a
gap of
42 mm to the front edges of
the door fittings.
Useful tip: If possible, remove door
fittings and push the appliance into the
niche until all fixing brackets at the top
and bottom are in line with the front
edge of the housing unit side wall.

Align the appliance on both sides by
altering the adjustable feet using the
spanner supplied.
Securing the appliance in the
niche
 Press the appliance against the side
of the housing unit on the hinge side.

Screw chipboard screws

through
the hinge plates at the top and
bottom and then the middle to secure
the appliance to the housing unit.