manualshive.com logo in svg

Miele K 35422 iD, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele K 35422 iD Скачать руководство пользователя страница 26

Door alarm

26

The appliance is fitted with a warning
system to avoid increased energy
consumption and food becoming warm
if the door is left open.

An alarm will sound if the door is left
open for too long. The alarm symbol 

will light up.

The time until the door alarm is
triggered depends on the selected
setting and can be either 2 minutes
(factory default) or 4 minutes. The door
alarm can also be switched off (see
“Further settings - Audible tones”).

As soon as the door is closed, the
audible tone will stop and the alarm
symbol 

 will disappear from the

display.

If no audible tone sounds even though
a door alarm is available, then the
audible tone has been switched off in
settings mode (see “Further settings -
Audible tones”).

Switching the door alarm off
early

If the noise of the alarm disturbs you,
you can switch the alarm off early if you
wish.

Touch the alarm off sensor.

The audible tone stops.
The alarm symbol 

 remains

illuminated until the door is closed.

Содержание K 35422 iD

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды