Warning and Safety instructions
9
Miele can only guarantee the safety of the oven when original
Miele spare parts are used. Faulty components must only be re-
placed by original spare parts.
If the oven is delivered without a power connection cable, a spe-
cial cable must be installed by a Miele authorised service technician
(see “Installation”, “Electrical connection”).
If the connection cable is damaged, it must be replaced with a spe-
cial connection cable by a Miele authorised service technician (see “In-
stallation”, “Electrical connection”).
During installation, maintenance and repair work, e.g. if the oven
interior lighting is faulty (see “Problem solving guide”), the oven must
be completely disconnected from the household electricity supply.
To ensure this, do one of the following:
– Disconnect the mains fuse
– Completely unscrew the screw-out fuse (in countries where this is
applicable)
– Pull out the plug (if one is present) at the wall socket To do this,
pull the plug and not the mains connection cable.
The oven requires a sufficient supply of cool air for efficient opera-
tion. Make sure that the supply of cool air is not hindered in any way
(e.g. by fitting heat insulation strips in the housing unit). Furthermore,
the required supply of cool air must not be excessively heated by
other heat sources (e.g. solid fuel stoves).
If the oven is built in behind a furniture front (e.g. a door), do not
close the furniture door while the oven is in use. Heat and moisture
can build up behind the closed furniture door. This can result in dam-
age to the oven, housing unit and floor. Leave the furniture front/door
open until the oven has cooled down completely.
Содержание H 2265-1 BP
Страница 79: ...Installation I N S T A L L A T I O N 79 Side view of H 22xx ...
Страница 80: ...Installation I N S T A L L A T I O N 80 Side view H 28xx H 25xx H 27xx A H 25xx H 27xx 43 mm H 28xx 47 mm ...
Страница 100: ...M Nr 11 190 060 02 en GB H 2265 1 BP H 2267 1 BP H 2760 BP H 2860 BP H 2850 BP ...