Problem solving guide
75
Problem
Cause and remedy
The browning of the
baked goods is uneven.
The wrong temperature or shelf level was selected.
There will always be a slight unevenness in brown-
ing. If browning is very uneven, check whether the
correct temperature and shelf level were selected.
The material or colour of the bakeware is not suitable
for the oven function selected.
When using the
Conventional heat
function, light
coloured, shiny tins will not produce as desirable
results. Dark, matt tins are best for baking.
The FlexiClip runners do
not push in or pull out
smoothly.
The bearings in the FlexiClip runners are not suffi-
ciently lubricated.
Lubricate the bearings with the special Miele lub-
ricant.
Only the special Miele lubricant is designed for the
high temperatures in the oven compartment. Other
lubricants may resinify when heated and will gum
up the FlexiClip runners. You can obtain the spe-
cial Miele lubricant from your Miele dealer or from
the Miele Customer Service Department.
There is still soiling in
the oven compartment
after a pyrolytic clean-
ing programme.
The pyrolytic cleaning programme burns off soiling in
the oven and leaves it as ash.
Remove the ash using a damp microfibre cloth or
with a clean sponge and a solution of hot water and
washing-up liquid.
If there is still coarse soiling left in the oven after the
pyrolytic cleaning programme you should start the
programme again, selecting a longer duration if ne-
cessary.
The door will not open
after the pyrolytic
cleaning programme.
The door lock for pyrolytic cleaning has not opened.
Turn the function selector to
0
.
If the door lock still does not release itself call the
Customer Service Department.
Содержание H 2265-1 BP
Страница 79: ...Installation I N S T A L L A T I O N 79 Side view of H 22xx ...
Страница 80: ...Installation I N S T A L L A T I O N 80 Side view H 28xx H 25xx H 27xx A H 25xx H 27xx 43 mm H 28xx 47 mm ...
Страница 100: ...M Nr 11 190 060 02 en GB H 2265 1 BP H 2267 1 BP H 2760 BP H 2860 BP H 2850 BP ...
