Cleaning and care
61
Cleaning the control panel
The control panel should
only
be
wiped with a damp cloth.
Cleaning the reflector panel
The reflector panel for the in-operation
indicator light is situated on the cover
sheeting underneath the countertop.
The reflector panel should only be
cleaned with a damp cloth if
necessary.
Cleaning the appliance front
Damage due to soiling.
Soiling that is left too long might
become impossible to remove and
could cause the external surfaces to
alter or discolour.
Remove any soiling immediately.
Clean the front with a clean sponge
and a solution of hot water and dish
soap. After cleaning, wipe the front
dry using a soft cloth.
A clean, damp microfibre cloth
without cleaning agent can also be
used for cleaning.
To avoid damage to the outer
surface, do not use:
- cleaning agents containing soda,
ammonia, acid or chloride
- cleaning agents containing lime scale
remover
- abrasive cleaning agents, such as
scouring powder, scouring liquid, or
pumice stones
- cleaning agents containing solvents
- stainless steel cleaning agents
- dishwasher cleaners
- oven cleaners
- glass cleaners
- hard, abrasive brushes or sponges,
e.g., pot scourers, brushes, or
sponges which have been previously
used with abrasive cleaning agents
- eraser sponges
- sharp metal scrapers
- steel wool
- steam cleaners
Содержание G 7156
