Miele G 7156 Скачать руководство пользователя

Страница: 78 / 96

Problem solving guide

Problem

Possible cause and solution

The dishware is not dry
or glasses and cutlery
are flecked.

The rinse aid dosage is set too low or the rinse aid
reservoir is empty.



Replenish the reservoir, increase the dosage, or
change the brand of rinse aid (see “Rinse aid”
under “Before using for the first time”).

The dishware was taken out of the wash cabinet too
soon.



Leave the dishware in for longer (see “Unloading
the dishwasher” under “Operation”).

The duration of the drying phase for the selected
program is not sufficient for the dishware (particularly
for plastic dishware).



Select the Extra dry function (see “Extra dry” under
“Settings”).

You have used combination products that have
insufficient drying performance.



Switch to another detergent or replenish the rinse
aid (see “Rinse aid” under “Before using for the
first time”).

Glassware has a brown
or blue tinge. The film
cannot be wiped off.

Ingredients from the detergent have formed a
deposit.



Switch to another detergent straight away.

Glassware is dull and
discoloured. The film
cannot be wiped off.

The glassware is not dishwasher-safe. The surface
has altered.



No remedy.
Purchase glassware which is dishwasher safe.

Tea or lipstick stains
have not been
completely removed.

The wash temperature of the selected program was
too low.



Select a program with a higher wash temperature.

The bleaching effect of the detergent is too low.



Switch to another detergent.

Содержание G 7156

































































































Результаты поиска

Содержание G 7156

Отзывы:

Похожие инструкции для G 7156

Бренды по названию

Популярные бренды

Miele G 7156, Руководство по эксплуатации

Результаты поиска

Содержание G 7156

Отзывы:

Похожие инструкции для G 7156

Бренды по названию

Популярные бренды