Guide to the appliance
18
Display functions
The display is used to select or set the
following:
- the program
- the timer
- the
Settings
The display can show the following:
- the program stage
- the estimated time left for the
program to run
- any relevant fault messages and
information
To save energy, the dishwasher
switches off after a few minutes if you
do not press any buttons during this
time.
Press the
button to switch the
dishwasher back on.
The
OK
button is used to confirm a
message or setting and also to move to
the next menu or another menu level.
Under
More
, a scroll bar
will
appear in the right of the display. This
offers further options. These options
can be shown using the
buttons.
You can alter the dishwasher’s controls
to suit changing requirements in the
Settings menu (see “Settings”).
The option which is selected will have a
check
next to it.
To exit a sub-menu again, press the
Back
button.
If you do not press any buttons for
several seconds, the display will revert
to the previous menu level. You will then
have to enter your settings again.
These operating instructions apply to
several different dishwasher models of
different heights.
The different dishwasher models will
be named as follows:
normal = dishwasher measuring
80.5 cm high (built-in appliance)
or 84.5 cm high (freestanding
appliance)
XXL = dishwasher measuring 84.5 cm
high (built-in appliance).
Содержание G 7156
