Midtronics MDX-650 MILITARY, Инструкция по эксплуатации

Страница: 19 / 20

•
19
•
Troubleshooting the Display
If the display does not turn on:
t $IFDLUIFDPOOFDUJPOUPUIFWFIJDMFCBUUFSZ
t 5IFWFIJDMFCBUUFSZNBZCFUPPMPX CFMPXWPMUUPQPXFSUIFBOBMZ[FS
Fully charge the battery and retest.
t 5IF BOBMZ[FST "" CBUUFSJFT NBZ OFFE UP CF SFQMBDFE BMLBMJOF SFDPN -
mended).
t *GUIFBOBMZ[FSEPFTOPUQPXFSPOXIFOZPVQSFTTBOEIPMEUIF MENU but-
ton, replace the AA batteries.
Replacing the Battery
The MDX-650 can test down to 5.5 volts when the unit’s internal batteries are
OPUGVODUJPOJOH5IFUFTUFSEJTQMBZT-08*/5&3/"-""#"55&3*&43&1-"$&""
#"55&3*&4400/ when the internal AA batteries need to be replaced.
NOTE:
Setup information will be retained while you change the internal batteries.
Use the following procedure to remove and replace the internal AA batteries.
1. Turn the tester face down.
2. Remove the screw securing the battery compartment cover using a small
Phillips screwdriver.
3. Lift the door off and remove the discharged battery.
4. Insert fresh AA batteries making sure the positive and negative terminals
are positioned correctly.
5. Reposition the cover and tighten the screw..
www.midtronics.com
MDX-650P
Battery Conductance &
System Analyzer