55
DIGITAL RACK MIXER M32R User Manual
MIDI CC (raw) selected and Remote is active, the group section controls
will transmit/receive the following messages:
MIDI RX
MIDI Ch
Controller
Comment
Group 1-8 SELECT
1
Note 64-71
on (127) / off (0), push non-latching
Group 1-8 SOLO
1
CC 32-39
on (127) / off (0), toggle latching
Group 1-8 MUTE
1
CC 40-47
on (127) / off (0), toggle latching
Sends On Fader
1
CC 48
on (127) / off (0), toggle latching
Group DCA 1-8
1
Note 72
on (127) / off (0), push non-latching
BUS 1-8
1
Note 73
on (127) / off (0), push non-latching
BUS 9-16
1
Note 74
on (127) / off (0), push non-latching
MTX 1-6
1
Note 75
on (127) / off (0), push non-latching
GROUP Faders
1
CC0-7
0-127
HUI selected and Remote is active, then the group fader section and
buttons will emulate the HUI control surface protocol, i.e. for ProTools.
SELECT/SOLO 1-8 buttons will select or solo the corresponding track in the DAW,
in banks of eight tracks
Sends On Fader = enables touch-writing a fader automation on selected track,
track automation mode in DAW must be ‘touch’, (latching)
Use the layer buttons to determine the function assigned to
the MUTE 1-8 buttons, the LED displays indicate that function.
•
Group DCA 1-8 = allows movement of the bank selection of tracks
in a DAW, (push non-latching)
•
BUS 1-8 = allows the setting of DAW tracks to ‘Record Ready’,
(push non-latching)
•
BUS 9-16 = enables use of MUTE buttons for track mute in
the DAW, (latching)
•
MTX 1-6 = enables use of MUTE buttons for transport controls in
the DAW, (latching).
MACKIE CTRL selected and Remote is active, then the group fader
section and buttons will emulate the Mackie Control Universal protocol
SELECT/SOLO 1-8 buttons will select or solo the corresponding track in the DAW,
in banks of eight tracks
Sends On Fader = enables touch-writing a fader automation on selected track,
track automation mode in DAW must be ‘touch’ or ‘latch’, (latching)
Use the layer buttons to determine the function assigned to the
MUTE 1-8 buttons, the LED displays indicate that function.
•
Group DCA 1-8 = allows movement of the bank selection of tracks in a
DAW, (push non-latching)
•
BUS 1-8 = allows the setting of DAW tracks to ‘Record Ready’,
(push non-latching)
•
BUS 9-16 = enables use of the MUTE buttons for track mute in
the DAW, (latching)
•
MTX 1-6 = enables use of the MUTE buttons for transport controls in
the DAW, (latching).
Содержание M32R LIVE
Страница 56: ...56 DIGITAL RACK MIXER M32R User Manual 4 3 Appendix C Dimensions Top View...
Страница 57: ...57 DIGITAL RACK MIXER M32R User Manual Rear View Side View...
Страница 67: ......
