Microtronics myDatalogNANO Ex, Руководство пользователя

Страница: 73 / 111

Chapter 9 User interfaces
9.2.1.8 Basic setting
Connection type Interval The device registers in the transmission cycle.
Interval & wakeup The device connects in the transmission cycle and can
be placed into ALOHA transmission mode via the
server.
online The device does not separate the connection and
continuously transmits the measurement data.
Aloha/wakeup duration Duration of the Aloha/wakeup connection
Transmission cycle
Time between transmissions
Transmission time Time at which the device establishes a connection to the server regardless
of the transmission cycle. However, this additional transmission is only
completed if a transmission has not already been completed 5 minutes
before this time or if a transmission will not be completed 10 minutes
after this time.
If an additional transmission has been initiated, the internal meter of the
device, that determines the time of the transmission, is reset. This means
that the next transmission is completed exactly after the time specified via
the "transmission cycle" parameter.
Record interval Time between measurement data recordings
Measure quick divisor record interval = record interval / factor (from triggering)
Measure slow factor record interval = record interval * factor (from triggering)
Measurement cycle Time between measurements (00:00 same as record interval)
Burst interval Period of time, during which measurement intervals are used for
measuring, before recording begins (00:00 measurement cycle is
permanently activated)
Time zone Regional settings (not relevant for raw measurement data as this is stored
in the UTC)
Rev. 01 73