Microtronics myDatalogNANO Ex, Руководство пользователя

Страница: 72 / 111

9.2.1.7 Alarm settings
Acknowledgement Standard The global server setting is used to determine whether alarms
must be acknowledged automatically or manually. (see
"myDatanet Server Manual " 805002).
Automatic Alarms are acknowledged automatically as soon as all of the
messages have been sent. If SMS that have a tariff with a delivery
confirmation function have also been sent, acknowledgement is
provided after delivery confirmation.
Manual Alarms must be acknowledged by the user.
Offline alarm Alarm in case the device does not respond for longer than the set number of
transmission cycles
Transfer volume Standard The setting for the transfer volume alarm is taken from the global
server settings. (see "myDatanet Server Manual " 805002).
Off The transfer volume alarm is deactivated.
Individual The level at which the transfer volume alarm should be triggered
can be entered in the adjacent field in KB.
On alarm A The alarm is recorded in the alarm list.
Ü An immediate transmission is initiated.
On warning A The warning is recorded in the alarm list.
Ü An immediate transmission is initiated.
On fault alarm
1)
A The fault alarm is recorded in the alarm list.
Ü An immediate transmission is initiated.
On fault warning
2)
A The fault warning is recorded in the alarm list.
Ü An immediate transmission is initiated.
1)
A "fault alarm" is triggered if a measurement channel is configured in such a way that one of the error values NAN, OL
(open loop), UF (underflow), OF (overflow) or SC (short circuit) is issued if the measurement range is breached and
maintaining the last measurement value is not activated or the maximum number for holding the last valid measurement
value has been reached.
2)
A "fault warning" is triggered if a measurement channel is configured in such a way that one of the error values NAN, OL
(open loop), UF (underflow), OF (overflow) or SC (short circuit) is issued if the measurement range is breached and the
maximum number for holding the last valid measurement value has not yet been reached.
72 Rev. 01