Microtronics myDatalogNANO Ex, Руководство пользователя

Страница: 55 / 111

Chapter 8 Initial Start-Up
4. Wait until it is indicated in the list of measurement instruments that the device is in
ALOHA transmission mode. This is indicated by a speech bubble with the "Aloha"
inscription.
5. Click on the speech bubble with the "Aloha" inscription to display the ALOHA data win-
dow and check the internal "GSM level" measurement value.
Note: Additional explanation about evaluating the "GSM level":
"GSM level"
>-64dBm
-64 to -73dBm
-74 to -83dBm
-84 to -93dBm
-94 to -107dBm
<= -108dBm
Note: Information on improving the reception quality is provided in chapter "Optimum antenna posi-
tioning for assembly in a shaft" on page 48.
8.4 Testing communication with the device
1. Create a site for operation on the myDatanet server (see "myDatanet Server Manual "
805002).
Note: A "myDatalogNANO" type site must be created to operate the myDatalogNANO Ex
.
2. Configure the created site according to your requirements (see "Site configuration" on page
59).
3. Link the myDatalogNANO Ex with the created site (see "Site" on page 59).
4. Initiate the ALOHA transmission mode (see "ALOHA transmission mode" on page 34) so that
the site settings are transferred to the myDatalogNANO Ex .
Rev. 01 55