Microtronics myDatalogNANO Ex, Руководство пользователя

Страница: 41 / 111

Chapter 7 Installation
1. First attach the assembly loop (3) using the screws (2) included in the "Universal bracket for
housing myDatanet 86x126 (206.640)" equipment set to the myDatalogNANO Ex (see "Step 1
of the wall mounting" on page 40).
2. Drilling the holes for mounting:
If you want to use the tapping screws (4) included in the equipment set to secure the
assembly loop (3) to the wall, drill four 6-mm holes in the wall using the drill template as a
guide in accordance with the dimensions in the diagram "Step 2 of the wall mounting" on
page 40.
If you want to use your own fastening screws you can use the drill guide provided in the
equipment set to determine the position of the holes. The diameters are then determined
by the screws that are being used and any wall plugs that may be required.
3. Securing the myDatalogNANO Ex to the wall:
If you want to use the tapping screws (4) included in the equipment set, first of all insert
the supplied wall plugs into each of the four drill holes before screwing the
myDatalogNANO Ex with the attached assembly loop (3) to the wall (see "Step 2 of the wall
mounting" on page 40).
If you are using your own screws, you must also insert the wall plugs into the holes before
mounting the myDatalogNANO Ex with the attached assembly loop (3) to the wall (see
"Step 2 of the wall mounting" on page 40).
Rev. 01 41