Microtronics myDatalogNANO Ex, Руководство пользователя

Страница: 68 / 111

9.2.1.4 Calculated channels
Note: The values of the calculated channels are directly calculated for every data output (display on the myDatanet
server or download from the myDatanet server). They are not saved in the server database.
9.2.1.4.1 Basis
Title 1-5
Freely selectable channel title for the calculated channels [0-16 characters]
Mode
Possible calculation modes for the calculated channels
Off --- Calculated channel deactivated
Table Min Defines the lower scale end of the pointer instruments
Max Defines the upper scale end of the pointer instruments
Unit String that is used as a measurement unit by all of the server display
elements [0-16 characters]
Decimal
places Number of decimal places that are used by all of the server display
elements
Digital Invert Inverts the input signal
+, -, x, / Min Defines the lower scale end of the pointer instruments
Max Defines the upper scale end of the pointer instruments
Unit String that is used as a measurement unit by all of the server display
elements [0-16 characters]
Decimal
places Number of decimal places that are used by all of the server display
elements
Delta Determines the difference between two measurement values and divides the result
by the time difference between the time stamps of the measurement values. The
time unit (value/sec., value/min., ...) for the result can be selected via the "Time
basis" parameter located in the "Calculation" tab. It is thus possible to convert the
meter reading (m
3
) of the source in to a flow rate (m
3
/min.) (see "Additional
explanation: Delta mode" on page 69).
Min
Defines the lower scale end of the pointer instruments
Max Defines the upper scale end of the pointer instruments
Unit String that is used as a measurement unit by all of the server display
elements [0-16 characters]
Decimal
places Number of decimal places that are used by all of the server display
elements
68 Rev. 01