Microtronics myDatalogGauge 3G, Руководство пользователя

Страница: 44 / 158

5. Either wait until the speech bubble is hidden again (setup mode completed successfully) or until the
background colour of the speech bubble changes from white to red (problem detected). In both cases,
this can take up to 8min. . If a problem is detected, it is advisable to improve the position of the antenna
(see "Optimum antenna positioning for assembly in a shaft" on page 62) and to start setup mode again.
Setup mode active Setup mode completed successfully Problem detected
Once the GSM level measurement has been completed, another connection is established to transmit
the measurement results to the myDatanet server. The background colour of the speech bubble with
the "Setup" inscription changes from white to red and the note "Setup mode failed (enhance antenna
position)" is shown in the "Setup data" configuration section if a new connection cannot be established
within the timeout of 5min. . In this case, setup mode should be activated again once the position of the
antenna has been improved.
Note: Information on improving the reception quality is provided in chapter "Optimum antenna
positioning for assembly in a shaft" on page 62.
"Setup data" configuration section: Setup mode phase 2 (wait for new connection to be established)
1 Remaining time during which a new connection must be established
2 GSM level values that were already transferred during the first of the two transmissions completed
as part of setup mode.
"Setup data" configuration section: Problem detected
6. Open the site settings (see "Site configuration" on page 79) and click on "Setup data" to display the
GSM level determined during setup mode.
44 Rev. 01