Microtronics myDatalogGauge 3G, Руководство пользователя

Страница: 79 / 158

Chapter 10 User interfaces
Display Explanation
Battery for the BLE Gauge needs to be replaced
Error
l
E02 ... last connection failed
l
E03 ... last measurement failed
l
BLE-Pairing of BLE Gauge sensor module and
myDatalogGauge 3G faulty
l
Sensor module battery is depleted (check
"PowerOn Flag")
l
E14 ... Charge state of the internal rechargeable buffer
battery is too low to establish a 2G/3G connection
(automatic recharge can take up to 4 hours)
l
E31 ... Signal line between BLE Gauge and the
pressure sensor interrupted
The batteries of the myDatalogGauge 3G need to be
replaced
10.2 User interface on the myDatanet server
10.2.1 Site configuration
Note: Depending on the respective user level, some of the configuration fields mentioned in the following sub-
chapters may be hidden. In this case, please contact the administrator of the myDatanet server.
Click on the name of the site in the list of sites to open the specific input screen for configuring the site. Clicking
on the symbol to edit the site will take you to the default input screen for configuring the site (see "myDatanet
Server Manual " 805002).
Rev. 01 79