Microtest HT-7630, Руководство пользователя

Страница: 30 / 45

26
7 FAIL O Determination FAIL
8 HV-ON O High voltage output in progress
9 GND --- Chassis Ground
10 TRIG I Test trigger
11 ABORT I Test abortion
12 RESET I Reset your machine
13 +5V --- DC +5V output
14 +12V --- DC +12Voutput
15 COM --- Circuit common terminal
Use description:
PIN1-PIN8 is a collector open output without any voltage or signal. Current passing
through the connector must be less than 50mA.
(1) TRIG (Pin10): Functions the same as the TEST key in the front panel when short
circuited with Pin15 (COM)
(2) ABORT (Pin11): Functions the same as the ABORT key in the front panel when
short circuited with Pin15 (COM)
(3) PASS (Pin6): Conduct with Pin15 (COM) when the DUT is determined to PASS by
your machine
(4) FAIL (Pin7): Conduct with Pin15 (COM) when the DUT is determined to FAIL by
your machine
(5) TESTING (Pin5): Conduct with Pin15 (COM) when your machine is testing
(6) H.V. ON: Conduct with Pin15 (COM) when your machine is outputting high
voltage