Microtest HT-7630, Руководство пользователя

Страница: 12 / 45

8
3.2 Standby screen
(1) Display the current test mode: Message “ACW” for AC voltage testing, “DCW”
for DC voltage testing, “IR” for insulation impedance testing
(2) Readings of the voltage, current (resistance in IR mode), and test time of the
measurement output port now. It displays the current voltage and test time
settings if no test is running now.
(3) Display the current status of your machine as illustrated in the table below:
Status display
Description
READY Your machine is ready for testing now, press the TEST key to
begin testing
TEST Testing now
WAIT The Trig Wait Time which can be set up in the CONFIG menu
WAIT KEY Waiting for the trigger signal for the next test
PASS Tested successfully (qualified goods)
Break Down Leak current exceeds the maximum measurement
Arcing Arc exceeds the upper limit
Lo-Limit Measurement exceeds the lower limit
Hi-limit Measurement exceeds the upper limit
FAIL At least one step in a multi-step test failed
INTER-LOCK High voltage safety lock on
VOLT-ERROR Voltage output error
OPEN Test wire disconnection error
(6)
(5)
(1)
(2)
(3)
(4)