Microtest HT-7630, Руководство пользователя

Страница: 27 / 45

23
4.3 Ending a Test
(1) Press the ABORT key to stop testing.
(2) Current/resistance measurements over the upper limit (HI-LIMIT)
(3) Current/resistance measurements below the lower limit (LO-LIMIT)
(4) Leak current over the maximum measurement (Break Down)
(5) Arc is over the settings (Arcing)
(6) Output safety switch is enabled (Inter Lock)
(7) Test DUT open circuit
(8) Test time expired
The test ends in case of any of the above. The high voltage output light indicator
turns off and the high voltage output closes after the test has ended. Tests
ended because of the conditions 2-8 described earlier will prompt
determination results.