4
(English)
5.
Click OK to bring up the following screen.
The SCSI card should now be listed, indicating
the driver is installed.
6.
Restart your computer.
Q4: My Microtek scanner came with dual
interface -- USB and SCSI. Can I connect both
interface?
A4:
A4:
A4:
A4:
A4: When connecting dual interface scanner to
computer, you should choose either USB or
SCSI, not both.
If SCSI interface is chosen, the terminator has
to be connected to finish a complete connec-
tion. Depending on different configurations,
you may require 25-pin SCSI terminator. If USB
If USB
If USB
If USB
If USB
is chosen, the SCSI cable along with the
is chosen, the SCSI cable along with the
is chosen, the SCSI cable along with the
is chosen, the SCSI cable along with the
is chosen, the SCSI cable along with the
terminator should all be removed.
terminator should all be removed.
terminator should all be removed.
terminator should all be removed.
terminator should all be removed.
Q5: What’s the recommended power up se-
quence?
A5
A5
A5
A5
A5 When using SCSI interface, be sure you have
connected the SCSI cable and the terminator
first, then connect the DC power adapter.
Q6: I have followed the above instructions, but
still cannot fix the problem.
A6:
A6:
A6:
A6:
A6: Visit the web site of the SCSI card provider
(e.g., Adpatec or AdvanSys)