2
3. Make sure that the FireWire card (IEEE 1394) is properly seated in your computer’s PCI slot.
a) Turn off your computer, then remove the cover.
b) Make sure the FireWire card is seated all the way in and secured into the PCI card slot. If the card is
not properly seated, REMOVE, and then REINSERT the FireWire card again.
c) Restart your computer.
Q2: The FireWire card (IEEE 1394) was found but my scanner cannot be detected by
Windows.
Follow the instructions below:
1. Turn off your scanner.
2. Make sure that only one FireWire cable is connected to your scanner. (You can only use one cable or
interface at a time).
3. Make sure to properly connect the scanner's FireWire cable to your computer, then plug the power
cord into a power source.
4. Turn on your scanner and wait until all lights on the front of the scanner to stop blinking and remain on
solid. Windows should now be able to automatically detect your scanner.
Q3: The FireWire card (IEEE 1394) was found but my scanner cannot be detected by
Windows 98 SE.
If you are currently using the FireWire interface on Windows 98 SE, you need to follow the instructions
below to reinstall FireWire driver.
1. Open the System Properties
System Properties
System Properties
System Properties
System Properties
dialog box by clicking the
following in succession: Start
Start
Start
Start
Start,
Settings
Settings
Settings
Settings
Settings, Control Panel
Control Panel
Control Panel
Control Panel
Control Panel, and
then double-click the System
System
System
System
System
icon.
2. From the System Properties
System Properties
System Properties
System Properties
System Properties,
select the Device Manager
Device Manager
Device Manager
Device Manager
Device Manager
tab, then double-click [?]
[?]
[?]
[?]
[?]
IEEE 1394 SBP2 Device
IEEE 1394 SBP2 Device
IEEE 1394 SBP2 Device
IEEE 1394 SBP2 Device
IEEE 1394 SBP2 Device to
open the its Device
Device
Device
Device
Device
properties
properties
properties
properties
properties dialog box.
3. Click the Reinstall Driver
Reinstall Driver
Reinstall Driver
Reinstall Driver
Reinstall Driver
button.
