Operating Instructions Thread tapping units/ Accessoriesr 01/09, Software 4.9
©
01.1994-2016 microtap GmbH
73
8.5.
LSM Air seal for exit of motor spindle
for megatap II
The air seal is to protect the interior of the machine and will be used at the following
working conditions.
-
Use of compressed air under the spindle.
-
Short chip materials
-
dirty contarminated air (ie. welds)
-
Atomised lubricants
8.5.1. Mounting of air seal
a
a
b
2. Switch off the machine.
3. Disengage the main connector.
4. Unscrew the coverplate of the spindle (b) at the underside of the machine head.
(4 screws (a) M3 x 10 with hexagon socket)
Luft
Air