Operating Instructions Thread tapping units/ Accessoriesr 01/09, Software 4.9
©
01.1994-2016 microtap GmbH
71
G
C
A
B
D
E
F
8.4.
DSK double spindle head
Installing and adjusting of double spindle head
8.4.1. Installing double spindle head onto the machine
1. Fit driver insert (C) to quick change system (E)
2. Locate double spindle head (A) with flange (D)
up to the motor (G), until the driver insert (C)
locks in the driver slot of the double spindle
head (A), rotate if necessary.
3. Clamp flange with fixing srew (F)
4. Adjust counter balance system using lever
8.4.2. Adjusting the hole centres
1. Loosen the central nut of the spindle housing (1) with hexagonal key (3).
2. Turn the spindle housing with spanner (2), until the desired centre spacing is
reached.
3. Fix the central nut (1) of the spindle housing with the hexagonal key (3).