Operating Instructions Thread tapping units/ Accessoriesr 01/09, Software 4.9
©
01.1994-2016 microtap GmbH
47
4.4.2.9
OPTIONS (not active at machine type jobtap)
PRINTER
AUTOMATION
STARTSIGNAL
PRINTER:
PRINTMODE
OFF
Select printmode via selector key (1):
-
Off -> no print
-
Auto ->Print after reaching the part number
-
ALL -> Record of every cut.
Selector key (3) print actual store.
AUTOMATION: (for customer specific functions, p. e. automatic vice)
Switch program on or off with selector key (1).
The program is preset with the following function: If the spindle is not in the start
position, the exit V3 is active (see chapter I/O I/O wiring diagram).
STARTSIGNAL
Switch program on or off with selector key (1).
This parameter is needed for the use with WinPCA (Version from 3.7) with TSE
Temperature-Sensor-Equipment. For the use with older versions this parameter has
to be set to off.
PROGRAM
OFF
SEND START
SIGNAL
ON