4 Table of Contents
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID F40
Edition 1.1
Chapter
Page
5. Panel Functions
43
5.1. Printing the Status Sheet
43
5.2. Printing the Font List
45
5.3. Choosing Print Resolution
46
5.4. Hexdump Mode Activation
48
5.5. Normal Print Mode Activation (incl. FORM FEED)
49
5.6. Clearing the Input Buffer (Cancel Job)
50
5.7. Printing the Menu Page
51
5.8. Generating Test Prints (Sliding Pattern)
52
5.9. Page Length Adjustment
54
5.10. Selecting the Number of Printpages per Page Format (Two-Up Mode)
56
5.11. Paper Width Adjusting (Format Width)
58
5.12. Print Direction Selection
59
5.13. Data Interface Configuration
60
5.14. Emulation Selection
61
5.15. Display Language Selection
63
5.16. Transparent Code Adjustment
64
5.17. Selection of Memory Distribution (Input Buffer)
65
5.18. Setting to Factory Default
66
5.19. Font Selection
67
5.20. Text Orientation Selection
70
5.21. Symbol Code Selection
71
5.22. Configuration of Text Margins
72
5.23. Image Shifting to the X-Direction
73
5.24. Image Shifting to the Y-Direction
75
5.25. Lines per Inch Setting (Line Spacing)
77
5.26. Number of Characters per Inch Setting (Character Spacing)
78
5.27. Print Density Setting
79
5.28. Configuration of Network Parameters (IP Address, e.g.)
80
