Microplex M204, Руководство по установке и настройке

Страница: 114 / 204

106 USING THE M204’S COMMAND SET: npsh Command Set
THE QUICK BROWN FOX JUMPS OVER THE LAZY DOG 1234567890 DE
THE QUICK BROWN FOX JUMPS OVER THE LAZY DOG 1234567890 DE
THE QUICK BROWN FOX JUMPS OVER THE LAZY DOG 1234567890 DE
...
3 loopback test.
Any input characters from the device attached to the output I/O port are
echoed back as output characters.
See also: stop on page 106 and list test on page 88.
stop
stop all|prn1|prn2|com1|com2
Stop an output test on the specified I/O port(s).
See also: start on page 105 and list test on page 88.
Store Commands
Change critical parameters such as network, I/O port, and protocol settings.
The three command possibilities are:
store choice parameters
Store some values.
store choice from default
Store default settings.
store choice from current
Store current settings.
choice and parameters can be any of the options listed next.
Once you store any parameters, you need to issue a reset command or do a
cold reboot of the M204 to apply the changes. Otherwise, you will still be
using the current settings.
For the store commands, these new words are important to know:
ifnum Interface number. An index to a Network Interface Tap
(NIT). Each PCMCIA slot is labelled with its particular
Interface Number with the first ifnum being 1.
NIT Network Interface Tap. A module that serves as a generic
Note