Microplex M204, Руководство по установке и настройке

Страница: 73 / 204

CONFIGURING THE M204 FOR APPLETALK: Additional Configuration Options 65
store pserver name Sales
This new name will also affect Unix, Novell and NetBIOS setups.
3 Enter the name that you would like to appear for the papname (e.g. laser). This
will make up the second part of the name in the Chooser.
store pserver applepap prn1 name laser
4 Reset the unit so the changes take effect.
reset
Removing Excess Printers from the Chooser
When you first install an M204 in an AppleTalk environment, you will notice that four
printers show up in your Chooser; one printer for each destination on the Print Server
that has AppleTalk services enabled.
If you want to limit the number of printers showing up in the Chooser, you need to dis-
able the AppleTalk service from the related destination’s list of services. To do this,
start an npsh session with the unit and follow the steps below:
1 Display a listing of the Print Server’s characteristics across all protocols.
list pserver
2 Look at the Apple Pap section of the listing to learn the destination name that
corresponds with the unnecessary printer’s papname.
3 For each printer that you do not want to appear in the Chooser, disable the Apple-
Talk service from the corresponding destination’s list of services. Type the fol-
lowing command:
set dest
destname service -appletalk
You can also turn off any other services that are not required by this destination in
the same way.
4 Repeat the previous step until you have removed the AppleTalk service from each
of destinations that correspond to the papname of the unnecessary printers.
5 Save the changes to EEPROM.
save
Note
Note