Microplex M204, Руководство по установке и настройке, Страница: 110 / 204

102 USING THE M204’S COMMAND SET: npsh Command Set
four digit hex value you’d like.
If you change the key value in npscramble.c, you must recompile the source
code and then use this key in the set sysinfo command.
set sysinfo dns ipaddress
Set the DNS server’s IP address so the M204 can resolve names used with
ping and telnet. Please see ping on page 90 or telnet on page 112.
set sysinfo email emailname@ipaddress
Set the user’s email address to receive printer logging information. email-
name is the IP name of the user to send mail to. ipaddress is the IP address
where the mail is stored. See also set logpath on page 95 to set printer logging
to email.
set sysinfo location [ locationstring]
Set the physical location of the M204. If the locationstring is not included in
the syntax, the field is emptied.
set sysinfo loginfo [[-]sys] [[-]tcp] [[-]ipx] [[-]spx]
Select the M204 debugging information type. Usually this information
includes unexpected errors or exceptions from the unit and can be broken
down into:
sys General system messages.
tcp TCP stack messages.
ipx IPX stack messages.
spx SPX stack messages.
This debugging information is from the M204 only, not from the printer.
Please see set logpath on page 95 and Capturing Printer Feedback on page
122 for details on acquiring printer logging.
Note
Note