Cyclone System Board Manual
44
Modem IRQ
Select an IRQ setting for the Modem On Ring selection.
Resume On Time
When this feature is turned On, the system counts down
to zero and awakes from Standby or Suspend mode.
Before making changes, “Customized” must be selected
in the Power Management Mode category. The default
setting is Off.
Power-On Modem Ring
When enabled, this selection allows the system to power
up when an incoming call is detected on your external
modem. The default setting is Disabled.
Programmable Power On
When this selection is enabled, you can set the date and
time for the system to wake up. The default setting is
Disabled. Before making changes, "Customized" must be
selected in the Power Management Mode selection.
Resume Date and Time
Set the date and time when the system is to wake up. The
Programmable Power On selection must be enabled.
Activity Event
Selecting this option opens the submenu to configure
IRQ’s for an Activity Event. Selecting an IRQ causes the
system to wake up from a power savings mode if any
activity occurs at that IRQ.
Chapter 4: The BIOS Setup Utility
