Cyclone System Board Manual
Chapter 4: The BIOS Setup Utility
33
Boot Options
This selection controls the system bootup options. Press
the ENTER key to enter the Boot Options submenu. You
can set the power-on state for the Numlock feature.
Setting Numlock to Auto (default) activates Numlock if
the BIOS detects a numeric keyboard. Setting the Floppy
Check selection for Enabled (default) will check for the
floppy disk type on bootup.
System Memory
The System Memory category identifies the size of the
base memory. It cannot be changed.
Extended Memory
The Extended Memory category automatically detects
the amount of memory installed above the amount in the
System Memory category. Because the BIOS automati-
cally calculates the amount of memory installed in your
system, you cannot change this category without adding
or removing memory.
