MicroNet SP5004P, Руководство пользователя

Страница: 56 / 126

55
to put through.
k.
Call Waiting
：
Enable or Disable the call waiting function
。
„
Enable:
During Talk, you can answer another phone call and hold the
original conversation. When some one call in when you are busy on
another phone call , you will hear a du-du call waiting signal, please use
flash key on your phone to hold the original call and answer the incoming
call, press again flask key will switch back the original call party.
„
Disable:
Disalbe the Call waiting function. The gateway will reply the
busy to remote side when the line is on used.
Index
Area
Code
Auth
Strip Prefix Maximum Minimum From To LineNo RS Verify
CallWaiting
Alert Profile Forward Delete
1 1 □ □ Rs1 Enable Delete
2 2 □ □ Rs Delete
3 3 □ □ rs3_2_1 Delete
l.
Alert
: Control the Ring Back tone generate timing:
„ Mode 0: When this VoIP Router get ring back tone from phone line, it will
send the ring Alert signal to remote VoIP Router for generate ring back
tone.
„ Mode 1: Before this VoIP Router dial to phone line, it will send the ring
Alert signal to remote VoIP Router for generate ring back tone.
„
Mode 2: After this VoIP Router finish dial out number to phone line, it will
send Connect OK signal to remote VoIP Router.
„ Mode 3: Before this VoIP Router dial to phone line, it will send the ring
Alert signal to remote VoIP Router for generate ring back tone, after this
VoIP Router finish dial out number to phone line, it will send Connect OK
signal to remote VoIP Router.
m.
Profile:
Define the optional special VoIP parameters when received on this
destination. Please input the name you defined on the profile list (
/VoIP
Setup/Routing Setup/Routing Profile/)
.
Example: if user set the VoIP Call in & Routing Profile like below: