MicroNet SP5004P, Руководство пользователя

Страница: 33 / 126

32
„ FXO: (DAA interface) for connect to telephone line or PBX extension line.
„ FXS: (SLIC interface) for connect to regulate phone set.
c.
Display Name
: display the remote party name of this VoIP call.
d.
Status
: Current status of this port.
„ Idle: Standby for make a phone call.
„ Signal: Waiting for DTMF press or VoIP protocol connecting.
„ In: There is a phone call made from phone port and call out to Network
by VoIP.
„ Out: There is a phone call made from Network VoIP and pick up by
phone set.
e.
Connected IP
: The remotely party IP of this VoIP call.
f.
Caller ID
: Caller ID received from telephone line port.
g.
Start Time
: Date & time of this VoIP call begin on this port.
h.
End Time
: Date & Time of last VoIP call End on this port.
i.
Talking Sec
: Total talked seconds of last VoIP call on this port.
j.
Dialed number:
„ On the VoIP call out (line status display “In”). This will display the real dial
out number for VoIP call.
„ On the VoIP call in (line status display “Out”). This will display the number
will dial out to phone line.
„ Release by: This will display the reason of this call termination.
B. Error Message
For some reason,(ex. All lines of this VoIP Router are busy) here will display the
failure information about the last failure VoIP Call.