MicroNet SP5004P, Руководство пользователя

Страница: 45 / 126

44
setting (
/VoIP Setup/Gatekeeper/
) in advance. For example: gk1 for
gatekeeper 1. gk2 for gatekeeper 2. gk for all the gatekeepers available
( search sequence: gk1 > gk2 > gk3 > gk4). Gk3_2_1 will try gk3 first,
then gk2, then gk1.
All the setting above can be added by port number, for examples:
168.56.9.22:8495 will call to 8495 port.
„
sr
n,
rs
n: same as
gkn
, basically, it is used for SIP register server.
„
PSTN:
route this call via PSTN line interface. This is usually used for for
the backup route for the rule setting on
/Routing setup /VoIP Call out/
with “v” prefix.
„
ipivr
: Enter the Network parameter voice interactive setting mode. User
can use this function to enter all the WAN network parameters without PC.
( Please refer the application note “
IP IVR produce
“ for more detail
procedure ).
„
ldcfg
: Restore all parameters to the default values. User can assign a
password to use this function to restore all the parameters to the default
values.
„
rect
: Enter to voice record procedure . User can assign a function code
for enter the voice record procedure, when press this code to enter the
voice record procedure, the device will record 30 seconds voice file and
keep on sound wave file ( G.711, uLaw), User can download the recorded
wave file on
/VoIP Setup/Advance setting/Prompt Voice/
and used this
file to upload for customization voice file or used for busy tone analysis.
„
agent
: agent code setting. When a VoIP call in made by this device, it will
ring the assigned phone set. If the user want to use the different phone
set (connected to same device, but did not ring) to answer the call, just off
hook and enter this agent code to redirect the call to this phone you used
for talk.
„
lo
: assign the route to local loop back. The destination IP of this call will
be the local host, i.e.:127.0.0.1