MicroNet SP5004P, Руководство пользователя

Страница: 43 / 126

42
call out rule without needed to press # key.
b.
FirstDigitTime
: Define the waiting time (seconds) for user press phone
number first digit. User need to press first digits before the setting time
(seconds) defined here, if VoIP Router wait for the defined seconds and there
is no any digits press, the VoIP Router will stop to wait and feedback the user
busy tone.
c.
OtherDigitTime
: Define the waiting time (seconds) for user press phone
number secondary & the rest digits. User need to press the rest digits before
the seconds defined here, if VoIP Router wait for the defined seconds and
there is no any digits press, it will go to translate for call out rule without
needed to press # key.
d.
Timeout for Re-entry route
: When one of the rules on the VoIP call out rules
is matched and be execute, the device will wait the time( seconds) defined
here for successful connection, but if time out defined there still failure
connection, it will trying to reroute by another call rule setting by the “v”+ the
number prefix.
For example as below, when the user try to call the destination number 12345678, it
will try to call the gateway location at 168.11.22.33, but if wait 10 seconds and still can
not successful connection, the gateway will abort the call and try call out by the PSTN
line.
<The example that use “v” prefixes for reroute the call out>
When user enable the hot line function on
/VoIP Setup/Line Configure/Line
Setting/
menu, it will over ride the above parameters and direct call out by hot line
call out rule.
B.VoIP call out Routing Table