Locate
screw
Rotation
door
Install
the
location
hole
Fix screw
Infrared Intelligent High Speed Dome Camera Operating Manual
4
1.3
．
Installation and debugging
1.3.1
、
Take out the main dome, wall bracket, wall boxing and other components.
1.3.2
、
Affix the wall boxing to the wall, according to the wall boxing size to drill corresponding hole, then install
the expansion bolts.
1.3.3
、
Connect the main dome with the wall bracket, and tighten the positioning screws.
1.3.4
、
Hang the wall bracket on the rotation door.
1.3.5
、
Plug the cable row into the socket signed "TO DOME" on the right of prevent lighting plate.
1.3.6
、
penetrate the video cable and 485 controls thread from waterproof screw, and contact to the corresponding
outlet signed "OUTPUT LINE" on the left of prevent lighting plate.
1.3.7
、
if the distance between the machine and control equipment over 500 meters, connect 485 matching
resistor jumpers on the prevent lighting plate to the two pins marked resistance.
1.3.8
、
The main dome has alarm linkage output function. According to the receiving equipment, toggle switch
S1 to choose two states normally open or normally closed.
1.3.9
、
Finally, tighten the two mounting screws. Access to 220V AC power supply must pay attention to color
-coded. (Blue and brown zero line and FireWire, yellow is earth wire)
1.3.10
、
These are wall mounting bracket installation method. If the choice of lifting brackets, installation is
also basically the same.
Alarm linkage input Port
485
matching
resistor
110
-
220V
Input
Earth
connection
Port
Fuse
12V
DC
input
Test port
Power
,
Video
,
485controls
Thread
（
To
insides
）
Video cable
、
485controls thread
（
To control center
）
Video cable
、
485controls thread
（
To control center
）