Detail Operation:
1
．
CRUISE SCAN Number:
press“IRIS +”to enter and choose scan nubmer,control lever up and down
to choose scan number group1-4.
2.Title setting:
press“IRIS +”to edit title, control lever up and down to choose number,letter and other
characters.left and right to edit position and modify characters,press“IRIS +”to save after
edit then return.
3.DWELL TIME:
press“IRIS +”to set the dwell time of every preset point.the default is 5 seconds.control
lever up and down to choose the number of second(1-255), press“IRIS +”to save after edit
then return.
4.EDIT CRUISE:
press“IRIS +”to enter edit cruise interface.move the cursor to the right“0000”set preset
point number 1, control lever up and down to choose one preset point of the number (1-220),
move to the right and then selecting“005”set dwell time of the first preset point. control
lever up and down to choose second(1-255),every group can up to set 32 preset point,same
with other preset points setting.press“IRIS +”to save after edit then return. Picture 9 shows:
5.SHOW ONLY ONCE:
press“IRIS +”to start current cruise scan once. the demonstration is over then back
automatically.
6.RUN CONTINUOUSLY:
press“IRIS +”to run current cruise scan.
7.DELETE CONTINUOUSLY:
delete the setted current cruise scan.Quick command of CRUISE SCAN:
using No.71-74 preset point to run the group(1-4) cruise scan respectively
in the standby mode.
3.4. <PATTERN SCAN> setting
Move the cursor to the <PATTERN SCAN >, press " IRIS +" to enter submenu. See Picture 10:
Application Note:
1.List in the order of from left to right, a line move to the next line when it is end;
2. A group cruise can up to 32 preset points position, each position of the preset point can not follow the
order of present
Infrared Intelligent High Speed Dome Camera Operating Manual
13
Picture10
：
<PATTERN
SCAN >setting
Picture9edit cruise scan: